🌿 Troy-Bilt CS4325 Chipper Shredder — Schrauf's Guides™
Turns branches and brush into tidy mulch fast — 3" chipper capacity and a built-in shredder for leaves and small debris.
Quick Steps:
1) Check oil before you start.
2) Place the chipper on level ground and clear the area of loose debris.
3) Start the engine and let it idle for a minute.
4) Feed branches slowly into the chipper chute — butt-end first, one piece at a time.
5) Drop leaves and small twigs into the top hopper for shredding.
6) Keep the discharge chute clear and direct chips where you want them.
7) When finished, idle the engine down before shutting off.
1) Check oil before you start.
2) Place the chipper on level ground and clear the area of loose debris.
3) Start the engine and let it idle for a minute.
4) Feed branches slowly into the chipper chute — butt-end first, one piece at a time.
5) Drop leaves and small twigs into the top hopper for shredding.
6) Keep the discharge chute clear and direct chips where you want them.
7) When finished, idle the engine down before shutting off.
💡 Tip: Feed material steady and slow — forcing it can clog the blades. Keep a rake or branch hook handy to clear the hopper safely between loads.